TG-T1000T 導熱膠帶
-
●良好的黏著性 (Acrylic PSA)
-
●高可靠度
-
●C/P值高
-
●加工容易
-
●依需求客製化
●良好的黏著性 (Acrylic PSA)
●高可靠度
●C/P值高
●加工容易
●依需求客製化
具有高熱傳導性及高黏度及低熱阻抗,可以有效取代導熱膏和機械固定的特性,用於填補發熱源與散熱片間的不平整空隙,並將電子產品產生的熱量帶離,達到降溫及散熱的效果。
產品應用
Electronic components: Electric Vehicles, 5G, Autopilot System, Mobile Phone, AIOT, HPC (High Performance Computing),Server, IC, CPU, MOS, LED, Mother Board,Power Supply,Heat Sink,LCD-TV,Notebook,PC,Telecom Device,Wireless Hub,DDR ll Module, etc.
Li98C | Li98CN | TG-T1000 | TG-T1000T | |
---|---|---|---|---|
導熱係數 Thermal Conductivity |
1.9 | 2.1 | 1 | 1.3 |
耐電壓 Dielectric Breakdown |
≥2 | ≥5.1 | ≥3 | ≥4 |
導熱係數 Thermal Conductivity 導熱係數是指材料傳導/傳遞熱量的能力。 Thermal conductivity refers to the ability of a given material to conduct/transfer heat. |
||
耐電壓 Dielectric Breakdown Voltage 耐電壓是指絕緣材料在施加電壓時能承受的電流指數。 Dielectric breakdown is the failure of an insulating material to prevent the flow of current under an applied electrical stress. |
物性表
物性 | 單位 | TG-T1000T | 公差 | 測試方法 | ||
導熱係數 Thermal Conductivity |
W/m•K |
1.3 |
±10% |
ASTM D5470 Modified |
||
厚度 Thickness |
mm |
0.11 |
– |
ASTM D374 |
||
顏色 Color |
– |
灰色 Gray |
– |
– |
||
補強材 Reinforcement Carrier |
– |
PET |
– |
– |
||
工作溫度 Operating Temperature |
°C |
-40~+120 |
– |
– |
||
短期耐溫 Short time Use Temperature(30sec) |
°C |
200 |
– |
– |
||
密度 Density |
g/cm3 |
1.5 |
- |
ASTM D792 |
||
初期黏性 Initial Tack |
cm |
24 |
– |
PSTC-6 |
||
保持力 Holding Power 1000g @25°C using 1 in2 |
min |
>1000 |
– |
PSTC-7 |
||
剝離強度 180° Peeling Strength (Aluminum) |
N/25mm |
≥7 |
– |
ASTM D3330 |
||
耐電壓 Dielectric Breakdown Voltage (AC) |
KV |
≥4 |
- |
ASTM D149 |
||
熱阻抗 Thermal Impedance @10psi |
°C*in2/W |
0.68 |
|
ASTM D5470 Modified |
||
熱阻抗 Thermal Impedance @30psi |
°C*in2/W |
0.66 |
– |
ASTM D5470 Modified |
||
熱阻抗 Thermal Impedance @50psi |
°C*in2/W |
0.65 |
– |
ASTM D5470 Modified |
||
●樣品需求? Need Samples? ●可依需求沖型裁切 Die-cut for different shapes ●可製成捲料 Roll type available |
||||||
●建議保存於 25°C以下之環境,並於6個月內使用完畢,以保持膠帶和離型紙具適當的黏合度 T-Global guarantees a 6-month shelf life at maximum continuous storage. Storage temperature should be under 25℃ to maintain controlled adhesion to the liner. |
(表格僅供參考,最新規格表請下載Datasheet)
相關材料推薦
-
●良好的黏著性 (Acrylic PSA)
-
●高可靠度
-
●C/P值高
-
●加工容易
-
●依需求客製化
具有高熱傳導性及高黏度及低熱阻抗,可以有效取代導熱膏和機械固定的特性,用於填補發熱源與散熱片間的不平整空隙,並將電子產品產生的熱量帶離,達到降溫及散熱的效果。