In accordance with the European Union’s General Data Protection Regulation (GDPR), we are committed to safeguarding and ensuring your control over your personal data. By clicking “Accept All” you are permitting us to use cookies to enhance your browsing experience, assist us in analyzing website performance and usage, and deliver relevant marketing content. You can manage your cookie settings below. By clicking “Confirm” you are agreeing to the current settings.
TG-P10090 Graphene
- Ultra thin; Low mass
- Available for unventilated design
- No dusting issue
TG-P1000 is Graphene and it’s the thinnest and hardest nanomaterial known in the world. It is lower than copper or silver and has the smallest resistivity in the world. Because of its extremely low resistivity and extremely fast electron migration, it is expected to be used to develop a new generation of thinner and faster conductive electronic components or transistors. Since graphene is essentially a transparent and good conductor, it is also suitable for manufacturing transparent touch screens, light panels, and even solar cells.
Suitable for small size products such as mobile phones, wearable devices, 3C electronic supplies, displays, etc.
TG-P10050 graphene isothermal sheet is a polymer composite material, in a variety of resin and plastic matrices. Lithium battery-Graphene added to the electrode material can improve cycle life and stability, electrical capacity, and achieve rapid charge and discharge performance. Soleil graphene has high transparency and low impedance characteristics, which can replace silicon or ITO electrodes as transparent conductive films.
Application：
Electronic components - 5G, Aerospace, AI, AIoT, AR/VR/MR/XR, Automotive, Consumer Devices, Datacom, Electric Vehicle, Electronic Products, Energy Storage, Industrial, Lighting Equipment, Medical, Military, Netcom, Panel, Power Electronics, Robot, Servers, Smart Home, Telecom, etc.
Properties
Unit
TG-P10090 Graphene
Testing methods
Thermal Conductivity (XY axis)
W/m•K
1500~1800
AC calorimeter
Thermal Conductivity (Z axis)
W/m•K
12
Laser flash
Total Thickness
μm
90
Meter
Copper Foil Thickness
μm
75
Meter
Coatung Thickness
μm
15
Meter
Vertical Resistivity (XY axis)
Ohm-Inch²
2.57
QJ1523-1988
Parallel Resistivity (Z axis)
Ohm-Inch²
0.66
QJ1523-1988
Cross-Cut Tape Test
4B
ASTM D3359B
Pencil Hardness Test
2H
ASTM D3363
Solvent Resistance (Alcohol)
5 times
Pass
ASTM D5402
Rubber Abrasive Test
150 times
Pass
ASTM D7835
High Temperature & Humidity Test @85° C/85%RH
500 hrs
Pass
IEC-60068-2-78
Thermal Shock Test @-20~+80° C
500 cycles
Pass
IEC-60068-2-14
Temperature Range
°C
-20~+120
ISO 16750-4