In accordance with the European Union’s General Data Protection Regulation (GDPR), we are committed to safeguarding and ensuring your control over your personal data. By clicking “Accept All” you are permitting us to use cookies to enhance your browsing experience, assist us in analyzing website performance and usage, and deliver relevant marketing content. You can manage your cookie settings below. By clicking “Confirm” you are agreeing to the current settings.
TG-P10050 Graphene
- Ultra thin; Low mass
- Available for unventilated design
- No dusting issue
TG-P100 is graphene, the horizontal (XY axis) thermal conductivity coefficient of graphene temperature equalizer is as high as 1500~1800 W/m•K, and the vertical conductivity (Z-axis) also has a thermal conductivity coefficient of 12 W/m•K. It is used to coat a thin layer of graphene on copper foil. The thickness is thin, the total thickness of TG-P10050 is only 50um. Graphene has good horizontal conductivity, will not have the problem of peeling and powder falling, and can quickly diffuse the heat source outwards to achieve excellent heat dissipation effects. It also has flexibility and bendability.
Suitable for small size products such as mobile phones, wearable devices, 3C electronic supplies, displays, etc.
In recent years, all electronic products have begun to develop in the direction of lightness and convenience, but at the same time, in order to maintain the high heat generated by high-efficiency and high-power chips, the high heat generated by the chip is also limited. The heat source expands outwards, and the thin and small volume will not bring too much load to the product. If the product structure needs to be bent, the possible characteristics of the graphene temperature sheet can also meet its needs. It can be applied to mobile phones, tablets, computers, and TVs, Wearable devices such as VR, smartwatches, and other electronic products.
Application：
Electronic components - 5G, Aerospace, AI, AIoT, AR/VR/MR/XR, Automotive, Consumer Devices, Datacom, Electric Vehicle, Electronic Products, Energy Storage, Industrial, Lighting Equipment, Medical, Military, Netcom, Panel, Power Electronics, Robot, Servers, Smart Home, Telecom, etc.
Properties
Unit
TG-P10050 Graphene
Testing methods
Thermal Conductivity (XY axis)
W/m•K
1500~1800
AC calorimeter
Thermal Conductivity (Z axis)
W/m•K
12
Laser flash
Total Thickness
μm
50
Meter
Copper Foil Thickness
μm
35
Meter
Coatung Thickness
μm
15
Meter
Vertical Resistivity (XY axis)
Ohm-Inch²
2.57
QJ1523-1988
Parallel Resistivity (Z axis)
Ohm-Inch²
0.66
QJ1523-1988
Cross-Cut Tape Test
4B
ASTM D3359B
Pencil Hardness Test
2H
ASTM D3363
Solvent Resistance (Alcohol)
5 times
Pass
ASTM D5402
Rubber Abrasive Test
150 times
Pass
ASTM D7835
High Temperature & Humidity Test @85° C/85%RH
500 hrs
Pass
IEC-60068-2-78
Thermal Shock Test @-20~+80° C
500 cycles
Pass
IEC-60068-2-14
Temperature Range
°C
-20~+120
ISO 16750-4