TG-T1000 Thermal Tape
-
●Features
-
●Good adhesion(Acrylic PSA)
-
●Great reliability
-
●Cost effective with great performance
-
●Easy to assemble
-
●Customization services for different industries
●Features
●Good adhesion(Acrylic PSA)
●Great reliability
●Cost effective with great performance
●Easy to assemble
●Customization services for different industries
It has high thermal conductivity, viscosity and low thermal resistance. It is a good replacement for thermal grease as the high viscosity can fix the electronic parts, which is also a great material for fill up the uneven surface between the heat source and heat sink , to transfer the heat to the heat sink finally achieve heat dissipation and lower the product’s temperature.
Application
Electronic components: Electric Vehicles, 5G, Autopilot System, Mobile Phone, AIOT, HPC (High Performance Computing),Server, IC, CPU, MOS, LED, Mother Board,Power Supply,Heat Sink,LCD-TV,Notebook,PC,Telecom Device,Wireless Hub,DDR ll Module, etc.
Li98C | Li98CN | TG-T1000 | TG-T1000T | |
---|---|---|---|---|
Thermal Conductivity | 1.9 | 2.1 | 1 | 1.3 |
Dielectric Breakdown | ≧2 | ≧5.1 | ≧3 | ≧4 |
Thermal Conductivity Thermal conductivity refers to the ability of a given material to conduct/transfer heat. |
||
Dielectric Breakdown Voltage Dielectric breakdown is the failure of an insulating material to prevent the flow of current under an applied electrical stress. |
Property table
Properties | Unit | TG-T1000 | Tolerance | Test Method | ||||
Thermal Conductivity |
W/m•K |
1 | 1 |
±10% |
ASTM D5470 Modified |
|||
Thickness |
mm |
0.15 | 0.25 |
– |
ASTM D374 |
|||
Color |
– |
White |
– |
– |
||||
Reinforcement Carrier |
– |
Fiberglass mesh |
– |
– |
||||
Operating Temperature |
°C |
-30~+120 |
– |
– |
||||
Short time Use Temperature(30sec) |
°C |
180 |
– |
– |
||||
Density |
g / cm3 |
1.2 |
– |
ASTM D792 |
||||
Initial Tack |
cm |
19 | 11 |
– |
PSTC-6 |
|||
Holding Power 1000g @25°Cusing 1 in2 |
min |
>3000 |
– |
PSTC-7 |
||||
180° Peeling Strength (Aluminim) | N / 25mm | >14 | >16 | – | PSTC-101 | |||
Dielectric Breakdown Voltage (Vac) |
KV |
≥3 | ≥6 |
– |
ASTM D149 |
|||
Thermal Impedance @10psi |
°C*in2 / W |
0.93 | 1.26 |
– |
ASTM D5470 Modified |
|||
Thermal Impedance @30psi |
°C*in2 / W |
0.76 | 1.06 |
– |
ASTM D5470 Modified |
|||
Thermal Impedance @50psi |
°C*in2 / W |
0.61 | 1.05 |
– |
ASTM D5470 Modified |
|||
●Compliance with REACH ●Compliance with RoHS |
||||||||
●Need samples? ●Die-cut for different shapes ●Roll type available |
||||||||
●T-Global guarantees a 6-month shelf life at maximum continuous storage. Storage temperature should be under 25℃ to maintain controlled adhesion to the liner. |
(The above table is only for reference. For the lastest SPEC please press DATASHEET button for download)
Related materials Recommended
-
● Good adhesion(Acrylic PSA)
-
● Great reliability
-
● Cost effective with great performance
-
● Easy to assemble
-
● Customization services for different industries
It has high thermal conductivity, viscosity and low thermal resistance. It is a good replacement for thermal grease as the high viscosity can fix the electronic parts, which is also a great material for fill up the uneven surface between the heat source and heat sink , to transfer the heat to the heat sink finally achieve heat dissipation and lower the product’s temperature.