TG-T1000 导热胶带
-
●良好的黏着性 (Acrylic PSA)
-
●高可靠度
-
●C/P值高
-
●加工容易
-
●依需求客制化
●良好的黏着性 (Acrylic PSA)
●高可靠度
●C/P值高
●加工容易
●依需求客制化
具有高热传导性及高黏度及低热阻抗,可以有效取代导热膏和机械固定的特性,用于填补发热源与散热片间的不平整空隙,并将电子产品产生的热量带离,达到降温及散热的效果。
产品应用
Electronic components: Electric Vehicles, 5G, Autopilot System, Mobile Phone, AIOT, HPC (High Performance Computing),Server, IC, CPU, MOS, LED, Mother Board,Power Supply,Heat Sink,LCD-TV,Notebook,PC,Telecom Device,Wireless Hub,DDR ll Module, etc.
Li98C | Li98CN | TG-T1000 | TG-T1000T | |
---|---|---|---|---|
导热系数 Thermal Conductivity |
1.9 | 2.1 | 1 | 1.3 |
耐电压 Dielectric Breakdown |
≥2 | ≥5.1 | ≥3 | ≥4 |
导热系数 Thermal Conductivity 导热系数是指材料传导/传递热量的能力。 Thermal conductivity refers to the ability of a given material to conduct/transfer heat. |
||
耐电压 Dielectric Breakdown Voltage 耐电压是指绝缘材料在施加电压时能够承受的电流指数。 Dielectric breakdown is the failure of an insulating material to prevent the flow of current under an applied electrical stress. |
物性表
物性 | 单位 | TG-T1000 | 公差 | 测试方法 | |||
导热系数 Thermal Conductivity |
W/m•K |
1 | 1 |
±10% |
ASTM D5470 Modified |
||
厚度 Thickness |
mm |
0.15 | 0.25 |
– |
ASTM D374 |
||
颜色 Color |
– |
白 White |
– |
– |
|||
补强材 Reinforcement Carrier |
– |
玻纤 Fiberglass Mesh |
– |
– |
|||
工作温度 Operating Temperature |
°C |
-30~+120 |
– |
– |
|||
短期耐温 Short time Use Temperature(30sec) |
°C |
180 |
– |
– |
|||
密度 Density |
g / cm³ |
1.2 |
– |
ASTM D792 |
|||
初期黏性 Initial Tack |
cm |
19 | 11 |
– |
PSTC-6 |
||
保持力 Holding Power 1000g @25°C using 1 in2 |
min |
>3000 |
– |
PSTC-7 |
|||
剥离强度180° Peeling Sterngth (Aluminum) |
N / 25mm |
>14 | >16 |
– |
PSTC-101 |
||
耐电压 Dielectric Breakdown Voltage (Vac) |
KV |
≥3 | ≥6 | – |
ASTM D149 |
||
热阻抗 Thermal Impedance @10psi |
°C*in2 / W |
0.93 | 1.26 |
|
ASTM D5470 Modified |
||
热阻抗 Thermal Impedance @30psi |
°C*in2 / W |
0.76 | 1.06 |
– |
ASTM D5470 Modified |
||
热阻抗 Thermal Impedance @50psi |
°C*in2 / W |
0.61 | 1.05 |
– |
ASTM D5470 Modified |
||
●符合REACH规范 ●符合RoHS规范 | |||||||
●样品需求?Need samples? |
|||||||
●建议保存于 25°C以下之环境,并于6个月内使用完毕,以保持胶带和离型纸具适当的黏合度 T-Global guarantees a 6-month shelf life at maximum continuous storage. Storage temperature should be under 25℃ to maintain controlled adhesion to the liner. |
(表格仅供参考,最新规格表请下载 DATASHEET)
相关材料推荐
-
●良好的黏着性 (Acrylic PSA)
-
●高可靠度
-
●C/P值高
-
●加工容易
-
●依需求客制化
具有高热传导性及高黏度及低热阻抗,可以有效取代导热膏和机械固定的特性,用于填补发热源与散热片间的不平整空隙,并将电子产品产生的热量带离,达到降温及散热的效果。